fuel pressure issue, dies at idle, needs re-priming to start
07-11-2020 | 09:35 PM
#11
Charter Member # 55
Joined: Oct 2000
Posts: 20,272
Likes: 2,513
From: Omaha/LOTO
Any decent mechanic can take apart a Holley Dominator and clean it.
It might just have just have a bad needle/seat or a piece of trash stuck in one the idle circuit holes.
It could also have a bad powervalve. No reason to send it to Nickerson.
It might just have just have a bad needle/seat or a piece of trash stuck in one the idle circuit holes.
It could also have a bad powervalve. No reason to send it to Nickerson.
