Offshoreonly.com - BBC 427 roller cam

Page 6 of 6

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - BBC 427 roller cam (https://www.offshoreonly.com/forums/general-q/369729-bbc-427-roller-cam.html)

GPM	12-18-2020 01:29 PM

Quote:

Originally Posted by F-2 Speedy (Post 4769626)

thanks for all the input guys, Rookie I already had the MK4 timing set and ordered the Lunati cam that was recommended by GPM shipping times right now are a mess, ups and fedex are ok but usps sucks

I'm not sure what Lunati says, but I personally, would degree the cam in between 102 and 104

F-2 Speedy

12-18-2020 02:09 PM

Quote:

Originally Posted by GPM (Post 4769655)

I'm not sure what Lunati says, but I personally, would degree the cam in between 102 and 104

Ill see what the cam card says when it gets here

Edit: card said install @ 4* advanced

SB	12-18-2020 04:58 PM

Quote:

Originally Posted by F-2 Speedy (Post 4769439)

Is that a flux capacitor......lol

yup, but doubles as Electric vacuum pump

liquidlounge

12-18-2020 05:54 PM

Quote:

Originally Posted by F-2 Speedy (Post 4769659)

Ill see what the cam card says when it gets here

Edit: card said install @ 4* advanced

Just keep in mind that finding the ICL on an assymetrical lobe is much more critical - I would follow the numbers on the cam card to a t. These types of lobes are fantastic and have an the advantage of acting smaller while still delivering the same on the 050 duration numbers.

All times are GMT -5. The time now is 02:14 PM.

Page 6 of 6

« First

Show 40 post(s) from this thread on one page