06 Lightening Transom and Stringer Rot?
#1
Registered
Thread Starter

I am down here in Texas as we speak looking at a 06 38 Lightening and just wanted to get some input on the transom and stringer situation on these boats. Was this particular year a problem one? I will only be here for 1 more day , any help would be greatly appreciated! Bilge is filthy and has some water in it. Doesn't look like has been very well cared for. Kinda sucks because engines/drives and hrs. are great. Boat runs and drives perfect, just needs some cleaning up!
#2
Registered
iTrader: (4)

All boats are susceptible to that type of rot. One of my boats is is currently getting a new transom and partial stringer replacement. Not the one I thought would be rotted though. If you're concerned I have bought a pinless moisture meter from Home Depot and it did correlate good and bad readings that were consistent from a professional survey. If you find uncomfortable spots you could negotiate from there. Unless you are already buying it right.
https://www.homedepot.com/p/General-...-MM9/303124004
https://www.homedepot.com/p/General-...-MM9/303124004
#5
Registered
iTrader: (4)

It correlated pretty good. Some spots near exhaust and drain plug measured 15-21% and in the middle of the transom measured 8%. There was a discernable difference. Drill holes confirmed.
I would be looking for differences.
I would be looking for differences.
#8
Platinum Member

iTrader: (6)
The following users liked this post:
Padraig (01-14-2021)