500EFI cam equivelent
 

Did a search but most threads are older. Now that Crane is no longer, what camshaft the closest to the 500EFI cam? Been searching and figured it may be better to ask here as it could take hours!

Each of Comp Cams Extreme Marine EFI cams are close copies of the Merc blue motors 3 cams.
look for the one near 230,236 at .050” 114 lsa and .610 or so lift.

Closest I've seen https://www.cpperformance.com/p-1159...-camshaft.aspx
Next step up https://www.cpperformance.com/p-1579...-camshaft.aspx

call bullet cams

Thanks Scott. I'll look again but the Comp Cams website isn't very user friendly. You have to click on each cam to see the lift and most of the cams I saw at the 230/236 range had lift in the mid .5 range.

Thanks Griff!

This is one I found with a little more duration and overlap.

https://www.howardscams.com/hydrauli...cams-120606-14

Okay, thanks. They have close copies of the 731 and 741 cams, but not the ‘in-between’ 500EFI one.

I looked at EVERY Gen VI cam on Comp's site and didn't see the 2 Griff posted. Maybe they are special grinds for CP and Hardin?

Those 2 are there.
Again, Comp Cam Extreme Marine EFI.

Not just the Comp Cam Extreme Marine

Maybe I am losing it in my old age. :)

They list 104 cams for Gen VI engines and I swear I looked at all of them. But I am not about to go try again. LOL

Here’s one, it’s close to the 52EFI cam:
https://www.compcams.com/xtreme-mari...en-vi-cpg.html

and same at Jegs:
https://www.jegs.com/i/COMP-Cams/249...BFVt3yz5bQsTZd


I’ll look for their other. Searching their site with a phone sucks. Lol. Doh.

very happy with the performance of that EFI cam!

500 EFI cam 230/236 0.598"/0.610" LSA 112°
Call comp and build the cam. Lobe 13045 and 13048 LSA 112° Tell them what you are trying to copy.
Any specific reason for the 500 EFI cam? Or just replacing old one?
I just put 2 500 EFI cams in the 454's I built for my Panther. Seem to run pretty strong.
https://cimg3.ibsrv.net/gimg/www.off...098b34ba2d.jpg