Offshoreonly.com - AFR heads and CMI's

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - AFR heads and CMI's - Gaskets? (https://www.offshoreonly.com/forums/general-q/371031-afr-heads-cmis-gaskets.html)

Rookie

04-03-2021 08:49 PM

Quote:

Originally Posted by F-2 Speedy (Post 4784266)

Call Edie Young, he has a multi layer gasket is is reusable. I ran them on the Merc racing heads and the AFR

A multi layer exhaust gasket? Interesting

SFOcean

04-05-2021 01:00 AM

fel pro 1411 1.940 round ports

fel pro 1412 2.130 round ports

liquidlounge

04-05-2021 08:38 AM

I have had MLS exhaust gaskets for 7-8 years now and all is good. Oddly enough, I got them from NAPA because I was in a jam - just asked for their best and they were all metal MLS. I don't recall the brand but I do know that they were plenty big enough for the Stainless Marine manifolds that I had.

TomZ	04-06-2021 01:14 PM

Much appreciated guys!

ph1971

04-06-2021 04:57 PM

I am 3 yrs into a pair of Mr Gasket 5912’s between pro 1’s and etops. So far so good. The gaske t should be fit to the exhaust side, so in our case round. Now if I could only keep the header bolts tight. For ****s sake

All times are GMT -5. The time now is 12:24 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page