Offshoreonly.com - Got screwed on a boat ..Need help

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Got screwed on a boat ..Need help (https://www.offshoreonly.com/forums/general-q/372086-got-screwed-boat-need-help.html)

Quote:

Originally Posted by AllDodge (Post 4794123)

Yes BUT ....
The difference in a "standard" B1, B2 and B3 is the lower ONLY. The upper is all the same

Now for the BUT
The lower will bolt to the upper provided they are compatible. Basically after 1993 your good

The gear ratio for regular Bravo 1's and 3's is determined by the upper gears.

Quote:

Originally Posted by Guitarhead (Post 4794138)

how can I trouble shoot it then ? When I pulled the outdrive it looked like there was no gasket and oil was leaking from the shift cable area ..I don’t know what to do now

Marlin was a popular west coast family boat line. In 1989 they ventured into the Performance line, built 18 Ceaero's but in 1991 company was purchased by Kal Custom and sold off in pieces. The Ceaero molds were sold to Magic boats, then there was some light changes and they were sold to Eliminator.

Mine was the "Hot Boat" magazine test boat in Feb 89(?) then was used by Land and sea to do prop testing. I Purchased it at Holiday Marine in Bullhead City in 89. Is your the Burgandy and Red?

Anyway.... They were fun boats back in the day, Couldn't roll them, just kept biting in when they turned. All had 454's Ran a respectable 65-68 depending on Props.

Only problem (at least with mine and it could have been because it was a test boat, stripped motor mounts out of the Stringers, but it was an easy fix. Other than that, was a fun/great boat back in the day.

Quote:

Originally Posted by Griff (Post 4794147)

The gear ratio for regular Bravo 1's and 3's is determined by the upper gears.

Not for B3

https://cimg5.ibsrv.net/gimg/www.off...42460ea4b1.jpg

Quote:

Originally Posted by Guitarhead (Post 4794138)

how can I trouble shoot it then ? When I pulled the outdrive it looked like there was no gasket and oil was leaking from the shift cable area ..I don’t know what to do now

So you've confirmed the upper shift cable is free. Is the lower shift cable free?

To my knowledge there is no gasket on any version of the bravo. Is the cable area leaking or when you pulled the drive and the petcock was depressed did it just leak gear oil?

Have you drained the oil to see what it looks like?

Also, if you bought a performance boat and get away with nothing other than an outdrive that blows up on you, you'll be the luckiest guy on this website!!!!

Quote:

Originally Posted by seafordguy (Post 4794164)

so there is no gasket when you pull the outdrive ? So I just slide it back on and put the nuts and washers on?

Quote:

Originally Posted by seafordguy (Post 4794165)

Also, if you bought a performance boat and get away with nothing other than an outdrive that blows up on you, you'll be the luckiest guy on this website!!!!

Lol 😂

i understand things break , but it was within the boats first 5 min on the lake

Title of thread is clickbait since no women pictures. LOLOLOL