Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   I need a new motor. Where to buy?? (https://www.offshoreonly.com/forums/general-q/376289-i-need-new-motor-where-buy.html)

Batmeat 07-06-2022 11:49 AM

I need a new motor. Where to buy??
 
Long story short, what I thought was a 454 GEN five mag turns out to be a low powered 454 with some mag parts. My motor is a ‘91 330hp 7.4L rebuilt motor with all stock components, total of 40 hours on the motor. Where does everybody buy their motors from? I’ve been looking around and only find scammer websites for engines. I boat at 6k feet in elevation. I’m looking for a 454 mag short or long block I can finish building or a complete 454 mag pumping out ~500hp ~550tq.
websites or people to contact would help me a lot. Will be selling my motor soon.

snapmorgan 07-06-2022 02:03 PM

Ateco Engine & Dyno Shop | Automotive & Marine Engines (atecoengines.com)

Batmeat 07-06-2022 02:14 PM


Originally Posted by snapmorgan (Post 4837482)

awesome!!

F-2 Speedy 07-06-2022 02:34 PM

if you are building new why not a gen 6 502 over a 454...........see if this is still available

https://www.offshoreonly.com/forums/...l-525-efi.html

Griff 07-06-2022 02:36 PM


Originally Posted by snapmorgan (Post 4837482)

After 20 months, my friend finally got his engine back from him and 5k over the quoted price

Griff 07-06-2022 02:37 PM

https://www.michiganmotorz.com/products/marine-engines

thirdchildhood 07-06-2022 02:52 PM

Watch the ads that show up here. I'd look for a 502 based engine. Be careful that you deal with a respected seller. 500 hp isn't going to come cheap.

bajaman 07-06-2022 05:07 PM


Originally Posted by Griff (Post 4837485)
After 20 months, my friend finally got his engine back from him and 5k over the quoted price

Simply unacceptable.

Batmeat 07-06-2022 06:56 PM

My engine bay is tight. I don't know the physical dimensions of the 502 vs the 454.

DrFeelgood 07-06-2022 06:59 PM


Originally Posted by Batmeat (Post 4837518)
My engine bay is tight. I don't know the physical dimensions of the 502 vs the 454.

Identical.


All times are GMT -5. The time now is 09:03 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.