|
Originally Posted by DrFeelgood
(Post 4840205)
Just be sure to enter it in the correct place - it's a little confusing on RockAuto. That code goes in the box marked "how did you hear about us", not a coupon code or discount code box.
Noted. Thanks. Brad. (937)545-8991 |
Originally Posted by SB
(Post 4840207)
Lisle (or other’s) spark testers are under $20 and found literally everywhere, including your local parts store:
https://cimg5.ibsrv.net/gimg/www.off...ec264eb0a.jpeg I've considered it. Can't you use a timing light to do the same thing? Just curious. Thanks. Brad. (947)545-8991 |
A timing light will flash when any spark is detected , a tester let's you see a spark to help determine the quality. Some more expensive ones are adjustable requiring the ignition to jump larger gaps to troubleshoot weak ignitions.
|
Originally Posted by Brad Christy
(Post 4840209)
SB,
I’ve considered it. Can’t you use a timing light to do the same thing? Just curious. Thanks. Brad. (947)545-8991 |
Plug wire off?:stooges:
|
Originally Posted by underpsi68
(Post 4840176)
That plug looks like something hit it? Aluminum?
Take a picture of the side of the ground strap on the plugs, like this. Trying to see the heat line, if there is even one. https://cimg4.ibsrv.net/gimg/www.off...d61f979354.jpg #5 https://cimg0.ibsrv.net/gimg/www.off...d6979b5b7.jpeg #3 (for reference) https://cimg2.ibsrv.net/gimg/www.off...e07a638ca.jpeg Thanks. Brad. (937)545-8991 |
Originally Posted by OFFSHOREJOJO
(Post 4840214)
Plug wire off?:stooges:
I would never be so bold as to say it wasn’t possible, but I’m pretty sure I had them on solid. Plus, I think it would be a pretty strong coincidence that the two potentially problematic cylinders should be the same two that I failed to connect with wires correctly on. Thanks. Brad. (937)545-8991 |
Originally Posted by SB
(Post 4840212)
Sarcasm. Okay, your considering buying coils too. :wink :)
Yeah, yeah.... I picked one up. :ernaehrung004: https://cimg2.ibsrv.net/gimg/www.off...24b1ead167.jpg Thanks. Brad. (937)545-8991 |
are you getting miss fire codes on the scanner ?
|
Originally Posted by F-2 Speedy
(Post 4840231)
are you getting miss fire codes on the scanner ?
We were not last year, when I had it scanned, but their scanner was also not able to initiate either an ignition or injector delete sequence, either, so I’m not sure it was a valid scan. Thanks. Brad. (937)545-8991 |
| All times are GMT -5. The time now is 02:50 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.