|
Bad ignition module symptoms??
What are the symptoms of a bad ignition module in a 500efi?
Anyone know the correct part number? Was looking on line and there appear to be a few different ones. It would be going on whippled 500efis. |
The pick up module in the distributor??? Most of the time, they just quit or will quit when they get hot
|
Originally Posted by bigboat28
(Post 4839587)
Anyone know the correct part number? Was looking on line and there appear to be a few different ones. It would be going on whippled 500efis. https://www.mercruiserparts.com/merc...08208-module-d I believe (but don’t quote me) the AcDelco is this: Remove old grease from pad module is mounted tooUse thermal paste, not the improper dielectric grease that comes with them. Put on extremely thin. |
miss fires on this system are most often the pick up coil and where it connects to modual they corrode and lose contact put a goooood new pick up in around 25 bucks
|
Mine would make a miss and not get above 3000 RPM's when it got hot.
|
| All times are GMT -5. The time now is 03:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.
