Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Rusty engine coupler - repair or replace? (https://www.offshoreonly.com/forums/general-q/377318-rusty-engine-coupler-repair-replace.html)

obnoxus 10-07-2022 03:06 PM
Lets see a close up of the splines

Tartilla 10-07-2022 06:50 PM
Originally Posted by obnoxus (Post 4847647)
Lets see a close up of the splines
The surface rust when cleaned up and painted, should not be an issue.
​
As mentioned, how are the splines and rubber bushing?

How often do they fail at your HP/boat weight level?

Is the rubber still supple? Or all cracked?
What is the 'quality' of a new one? Made offshore?

I'm all for reliability. I run a single engine. But you have to be reasonable.


All times are GMT -5. The time now is 07:22 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.