|
3 Attachment(s)
Originally Posted by PQ290Enticer
(Post 4864329)
Probably a good call. I think my new oil thermostats are going to be constantly cycling because the coolers are waaaaay to big. 3" x 23"
https://cimg4.ibsrv.net/gimg/www.off...f50b2a49cc.jpg What is up with all the 12v+ posts going on? :eek: Speaking of the oil thermostat, I'm going to replace mine, the spring, and the O ring because of age. But holy crap, $65 for a thermostat? Dam.......... |
I finally got an answer from my engine guy. He says with my HP, run the same one that came with the HP 500, but replace the one I have. Not worth risking thousands for a few hundred bucks.
I see OEM are discontinued. But Mr Cool has a replacement for $300 and Seakamp has one also for $365. So that's the route I'm going. The only thing that stinks is the replacement cooler still only has 1/2" NPT oil hose fittings. The performance coolers have 3/4" So you can install larger oil hose. Thanks for the replies everyone. |
| All times are GMT -5. The time now is 01:11 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.