Offshoreonly.com - L29 MPI Gen VI low oil pressure

Page 2 of 2

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - L29 MPI Gen VI low oil pressure (https://www.offshoreonly.com/forums/general-q/380227-l29-mpi-gen-vi-low-oil-pressure.html)

bajaman

08-14-2023 05:15 PM

$150 is a steal.

Tartilla

08-14-2023 06:38 PM

Quote:

Originally Posted by bajaman (Post 4876592)

$150 is a steal.

I'm just happy to hopefully find a decent core. It's hard up in BC, no wreckers have them...and nothing decent advertised.

Tartilla

08-26-2023 11:09 PM

Did the big ferry to Port Angeles day. Got both blocks.

https://cimg5.ibsrv.net/gimg/www.off...86abc8424b.jpg

Tartilla

08-27-2023 12:06 AM

Dude had it covered but some water got in the open valley.

https://cimg9.ibsrv.net/gimg/www.off...32d2a089f8.jpg
#1 Main looks good.

Have to see where the low oil pressure was coming from.

https://cimg6.ibsrv.net/gimg/www.off...ae30b57155.jpgL29 but the guide plates have HI PERF stamped on them.

Cast crank.

Tartilla

08-27-2023 01:18 AM

Best part was my 12 yr old Daughter tearing it down.

Tartilla

09-05-2023 09:18 PM

Some core shift.

https://cimg1.ibsrv.net/gimg/www.off...b6f0222c6c.jpg
https://cimg3.ibsrv.net/gimg/www.off...6405e4e9cc.jpg
Looks like the core shift would make the bores thicker on the thrust side.

I'll have to sonic test. Only planning 0.30" over to 4.280"

All times are GMT -5. The time now is 06:22 AM.

Page 2 of 2