|
Cmi tail leak test
Hi everyone
if someone can please put a link for the page on how they pressure test their tail pipes would be appreciated. I have searched all over oso but can’t seem to find it thank you very much |
Post a picture of ur tailpipes, so we can see what the outlet end looks like.
|
Originally Posted by TomFTM
(Post 4880770)
Post a picture of ur tailpipes, so we can see what the outlet end looks like.
here it is…thank you! |
need to see the outlet side, the end where the exhaust comes out . so we can see how to plug it ,to pressure test . is it a dry tip or does the water mix there .
|
Originally Posted by TomFTM
(Post 4880865)
need to see the outlet side, the end where the exhaust comes out . so we can see how to plug it ,to pressure test . is it a dry tip or does the water mix there .
This is the other side. By wet you mean water passes through it, if so yes it does from the header |
Bump
|
Anybody can help me on this… appreciate w
|
What Tom wanted is a picture of the end that is sitting on the table
|
Probably need something like this to seal off the water discharge holes/slots then pressurize the water jacket with air.
https://www.mcmaster.com/products/te...latable-plugs/ Actually Amazon has them. |
If anyone can share any links to a thread on this
thabks |
| All times are GMT -5. The time now is 05:37 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.