Offshoreonly.com - Testing a 12 v coil

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Testing a 12 v coil (https://www.offshoreonly.com/forums/general-q/380733-testing-12-v-coil.html)

Quote:

Originally Posted by getrdunn (Post 4884073)

Getting a set of trick flows I think so std headers will bolt up also. I should’ve done this from the get go.

Valako built my SBF with These. He said they flowed pretty good. He did minor port work to them.
https://promaxxperformance.com/product/maxx-180-sbf/
https://cimg3.ibsrv.net/gimg/www.off...796260d716.jpg
https://cimg3.ibsrv.net/gimg/www.off...78b3d5ea22.jpg

Quote:

Originally Posted by Rookie (Post 4884097)

Tks Jason - I was gonna reach out to him today and see about options. The stock runner size on the j302 heads is like 170 and probably close to 200 currently. I wanted to talk to jim about larger runners possibly to help slug it down a bit down low under 3,500 or so.

It’s got gobs of torque that’s just wasted almost with current drivetrain etc.