Blower height??
 

Anybody know the measurement from the intake T stat housing to the top of the Carbs for a 871/1071 Blower w/ and wo/ intercooler?
Thanks

Dan

i think its between 20 to 24 inches depending on the carb plate on the blower hope this helps

DanB

Get in touch with Marv at The Blower Shop he can give you all of the exact sizes. www.theblowershop.com

Dan

The rotor housing itself is 7.5" the intake manifold is around 5" the intercooler (super chiller) is 4" then depending on which plate you use can add another inch plus the carb and a scoop which will be close to 6"

It looks like close to 23" from lifter valley deck to top of scoop.

hope this helps
DAVE

Switching from a victor jr with an 850 to a 6 71 with 750's It was 7" taller. not sure any of this help........
MikeW

Go Dan Go!!!!!I want that thing installed before I get there....hope to be there in Feb.
Don

Don
Just pulling the motor out next week for a 100 hr tune and freshen. Tossen a few things around in my head. The blower being one of them. I'll have it ready for ya when ya get here :)

Dan