Offshoreonly.com - Ignition Pickup Solutions for EFI

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Ignition Pickup Solutions for EFI (https://www.offshoreonly.com/forums/general-q/384568-ignition-pickup-solutions-efi.html)

Precision

01-13-2025 12:11 PM

Ignition Pickup Solutions for EFI

In the quest to make things easier to build I came up with this over the weekend. I needed a way to hold three different things on the front of the motor. Crank pickup, Cam pickup, and timing pointer.

This is what I came up with. Production started today, if anyone else is in a similar situation let me know. We are making a run of 50.

https://cimg7.ibsrv.net/gimg/www.off...9d2ced9ea5.jpg

Ryanw10

01-13-2025 02:13 PM

Curious to what the cam sensor is picking up on? Is it those holes, and is there 1 hole different than the others?

Precision

01-13-2025 02:28 PM

Quote:

Originally Posted by Ryanw10 (Post 4918101)

Curious to what the cam sensor is picking up on? Is it those holes, and is there 1 hole different than the others?

Ryan, good question. We have flying magnet that is a 5/16" bolt with a magnet that you install into the cam gear.
https://cimg0.ibsrv.net/gimg/www.off...d84d3b5253.jpg

All times are GMT -5. The time now is 05:59 PM.