![]() |
Drive Showers - Worth It?
I'm looking at a couple different options of drive showers for a stock Bravo 3 on my express cruiser (not gonna be setting speed records)... Its still using the thru-leg cooling setup for now..
Given that its still being cooled by water inside the drive, is there still any benefit in my situation to add a drive shower? Personally, I like the look and simplicity of the sport tech cap on Hardin so leaning towards that, but I just wonder if its overkill for me. |
Heat is the #1 killer of drives outside of abuse, showers are always welcomed
|
This is cheap, might not be the best. Pair this with the Simrek drive shower for good measure. Clean overflow bottle out real good and monitor it for burnt fluid. As you know. B3 drives run pretty warm and as said heat will a big contribution to killing it. Pick your flavor of Lube.
https://www.ebay.com/itm/28221628448...gaAjnFEALw_wcB |
I waited a long time before getting mine installed, but finally did with no regrets. My drives stay cleaner and ditto on the heat/cooling benefit. Yes worth it, I'd do it again. Baja 35 Outlaw with twin 525s, Bravo One Sportmasters.
|
I put a Simrek shower on my Bravo 3. I feel it helps keep it cooler
|
I assumed the general consensus was "yes, worth it", but I was just curious if anyone had any "hard data" that shows how much it lowers the temp of the drive oil.. If I was super motivated, I would consider trying to figure out how to get a thermocouple inside a drive to measure lube temp lol, but I'm definitely not interested in drilling holes in my drive..
I'll definitely be looking to pick up one in the near future.. I'm still leaning towards the sport tech from hardin.. I really like how low profile it is. |
Their website is very old school.
but you want the Max Machine Worx drive shower. Best product out there. https://maxmachineworx.com/accessories/ |
I run this style plus a -12 intercooler dump on top the drive............shippy I think you are way over thinking this
https://cimg8.ibsrv.net/gimg/www.off...21228dcb48.jpg |
The IMCO is nice and works well
Padraig |
Originally Posted by F-2 Speedy
(Post 4928216)
I run this style plus a -12 intercooler dump on top the drive............shippy I think you are way over thinking this
https://cimg8.ibsrv.net/gimg/www.off...21228dcb48.jpg |
| All times are GMT -5. The time now is 04:44 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.