4" Exhaust Tube Best Price?
 

Who has the best price on 4" rubber exhaust tube?....Thanks, Fred

How much do you need?

I haven't made final measurements yet but I will need 4 pc's for BBC with center risers and TRS drives with BW transmissions, 4" ID.... Fred

Fred I have the same set up and I used stainless pipe on mine btwn the riser and the tip. It looks MUCH better and if you get a little dry on the exhaust it does not burn up. I have lots of pipe left if you are interested give me a call and I will hook ya up. (978) 985-0639

Jon

Jon's approach is the best, looks really great and lasts much longer.

hey audio fn can you build transisions(spelling?)

I had it done for me.

Jon

who did you use can you just buy the pipe and have someone local do it? tig?

No welding....you couple and clamp the rubber 4" hose at the riser and the tailpipe with the stainless pipe between....Fred

Fred he is talking about having bends in the pipe. I have a friend that is a REALLY good welder and he welded it for me. He used a Tig welder and before he welded it he made sure it was SUPER clean, put a plug in the ends and then filled the pipe with gas. I guess this gave beter penetration on the weld. What ever it was the welds are PERFECT. :D:D

Jon