Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   More horsepower (https://www.offshoreonly.com/forums/general-q/40719-more-horsepower.html)

michigandale 01-17-2003 11:03 PM

One way to increase performance would be to change to a Pulsedrive. You get on plane quicker, and get 10-12% top speed increase over the standard merc outdrive. Five year warranty, and no maintenance. The down side to the pulsedrive is..... gee there isn't any! The last drive you will need to own because pulsedrive is a drive that lasts. 888-818-6039

Fast Shafts 01-18-2003 08:40 AM

Michigandle-are you a dealer for Pulse Drive? All 6 of your post so far have ben "rah rah pulse drive"
BVS is looking for an inexpensive way to increase power. I doubt that swapping over to an $8000. dollar drive, sealing the transome, moving the engine forward and adding extensions onto the exhaust is what this guy is looking for. Stop with the hidden agenda.
Bob

Whitey 01-18-2003 08:43 AM

One down side is the cost of the drive system and the cost of fixing the holes in the boat and the cost of adding the trans and the extension for the trans.
If you had a carb you could intall the projection system from holley which could be dialed in. I remember a company that built a interceptor to change computer systems on the fly but, it was for autos. One in the marine industry would be sweet and a fix for several of the problems people have with there boats.

Whitey 01-18-2003 09:57 AM

Hey Robert you beat me to it, damn dial up....lol

blown1500 01-18-2003 10:12 AM

Hello, Guys,
ACCELL says they have something for the GM crate FI engines to allow programing on your own.. These engines use the same Delphi jJECU we are stuck with so it should work on the Mercruiser also-I hope!!!
If you will go to Mr.gasket.com, you can access Accell and ask for a catalogue. It has a LOT of good FI info-like how to make your injectors feed a few more horses and much more!!!

bobby daniels 01-18-2003 11:07 AM

ROBERT (BLOWN 1500 )ARE YOU SURE YOUR NOT TALKING ABOUT THE 8HP BRIGGS & STRATTON I DROPPED OFF TO YOU THE OTHER DAY ??
ACCELL IS GREAT FOR THAT , SEE YA !!

dyno 01-18-2003 06:13 PM

Keep the 7.4 for a spare and buy a crate motor from Teague or I'm sure Blown1500 could set you right up!!!

blown1500 01-19-2003 02:10 PM

Dyno!!!
He said "lesser expensive"!! Heads, intake and cam are very effective on this motor. How much did you say the crate motor costs??????????

dyno 01-19-2003 07:54 PM

I bought a 420 locally for 2K.....you play your cards right you can get by for less than shoving a ton of money in a 7.4. I did mine but thats becouse I had to it was shot. If you look you can find 502 take outs for not a whole lot more than if you sold the 7.4......my.02

KAAMA 01-19-2003 08:06 PM

Yeah Robert, what's the big idea with this 8hp Briggs & Straton bobby is talkin' about??? :p ;)


All times are GMT -5. The time now is 09:59 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.