|
Originally Posted by veritas
(Post 4850598)
601-259-9745 Brians Marine
|
Must be a record or close to it.
|
Originally Posted by bajaman
(Post 4850614)
...resurrecting a 19 year old thread...?
|
On the other hand, it was interesting to see the prices on the parts at the time!
|
Originally Posted by bajaman
(Post 4850619)
On the other hand, it was interesting to see the prices on the parts at the time!
I remember when the gmpp 502 shortblocks 1st came out. Early-mid 90’s. Around 94 maybe ? Was like $2400-$2800. Yes, lots of time has passed, but that was quite affordable for those times too. |
Originally Posted by DrFeelgood
(Post 4850617)
...on his very first post too!
His 1st post but has been registered since 2005. :eek: |
Originally Posted by bajaman
(Post 4850619)
On the other hand, it was interesting to see the prices on the parts at the time!
|
500
Originally Posted by JimV
(Post 480108)
Dyno
I got a line on three hp 500's 300 hrs. $5000.00 ea. no carbs or distributors |
Originally Posted by Chuck Martin
(Post 4858417)
are those available?
|
502 big block
Originally Posted by cheech
(Post 4858622)
Anything could happen, but if you weren't aware what you quoted was posted 20 years ago. :eek:
|
so whos using who for long blocks.
|
what are you looking for ?
|
Originally Posted by Chuck Martin
(Post 4858639)
thats ok we can update it
Just an FYI is all. The user you quoted is Jim Valako. Valako race heads. Although he hasn't logged into this site since 2017. |
Originally Posted by F-2 Speedy
(Post 4858647)
what are you looking for ?
|
Originally Posted by Chuck Martin
(Post 4858726)
i looking for a 502 longblock preferably with a little bit of cam upgrade overstock. or someone to do machine work on mine.
|
502
44143 cleveland ohio
|
Check out Fakebook marketplace in Mentor. There's a 502 bored .030 over to make it a 509. Heads already installed. They say it was done by Gellner engineering. $12, 500
|
502
I have one runs good in my boat now don't know what cam it's a 90s motow had a merc anifoldon it flat tappet hydrauliccam had 62 hrs o. It wen I got it makes my 7000 lb boat go 60 carbed
ow. 6000 in NY |
502
631 902 4665
|
502
Also have a 522 shortblock 4.560 bore 502 crank merc I beam rods je p istions it's apart needs balance job,hone put b a ck together 3k also have a 539 4.125 crank,4.560 bore crower crank and rods,je blower pistions fresh rebuild independent balan e job 570 lift mild boat cam built for myself,shortblo k is assembled std crank .028 ring gap 5500 cash only no shipping no warranty
|
| All times are GMT -5. The time now is 09:47 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.