Grimes ? Bypass / Pop-off Valve
 

Can anyone gime a contact number or web site for an inline sea-water pressure relief valve made by a company called Grimes in the southeast somewhere?

"GRIMES Twister Engines and Grimes Machine are located in Alpharetta, GA just off GA 400 N.

Grimes offers a full service engine machine shop with years of experience to give you the horsepower you are looking for.

Give them a call at 770 475 5272 for the best in engine building."

...pulled that from someone's webpage....not sure if it's what you're looking for...

Thanks Nathan !!

Your welcome.

I just saw stainless marine's new strainer with high pressure relief valve built in...looks pretty slick.

Link to their new strainer

Stainless Marine does an excellent job and their strainer has a higher reserve capacity than most. Important with any stepped bottom or high flying boat! Imco will also build any size strainer and include a poppet valve when requested. Possibly any high flow check valve with a cracking pressure of 2 psi will work and not load the impeller excessively.

Check with Mikehtmsr24 on the board. He has some kind of water bypass from Grimes.