TRS----Taking apart?
 

Ok-- I'm trying to pull my lowers off my trs's in order to pull a 2" spacer out. I've taken all nuts off-- 3 on each side, one on top at front, and even the anode bolt, but isn't even budging. Am I missing something? I don't want to break anything,-- the one was apart last year for new bearings and seals and it won't even move. Is there an exploded view of these somewhere, I'd also like to see if there's an extension on the drive shaft, or if i'll have to change them. Any help out there, Please, and thanx. Dave

Dave, there is one aiming up under the anode

Once you get it apart I would suggest putting white lithium grease or the Merc anti seize on the threads and bolts to help keep it easy to pull apart in the future.

Jon

Marc --thanx that was the one I was missing! Came right apart after that.
I'm going to have to locate 2 new/used shaft couplings, they would be for trs without any spacers, does anyone know where to find these?? Marc??

I bet I have a couple of used ones, but we are in the middle of a move. It will be weeks until all the stuff is unpacked.

Now I remember how much I hate moving, about 50 pallets so far and it looks like we have'nt even started.

considering i just had to kick the door through three feet of snow i think i can wait a couple of weeks;) let me know how you make out. thanx again. Dave