Ignition Wire Sets
 

Has anyone ever tried these? Seem like a quality wire set, costly, but high end:

http://www.vitekperformance.com/product/wires.asp

Great color selection!

I've never seen or heard of these new Vitek wires-----supposedly, the Taylor brand wires are supposed to be one of the best if not THE best.

I have the 8.8mm Accels....

I get a little turned off by products that make ridiculus claims i.e.

The best example of the benefit performance wires offer is when you step on the gas at a stop light and feel a bogging sensation until you reach about 40 mph and then the power kicks in. The reason for this is that you are trying to force more fuel into the system than the system can burn with low-end plug wires. The smoke coming out the tail pipe is simply unburned fuel. The factory wires do not burn hot enough to efficiently burn all of the fuel your sending into the fuel system. Performances ignition wires burn hotter and thus burn the fuel more consistently and thus not only offers more power, but also offers better fuel economy.

Are they telling me that if my pos car is blowing smoke out of the tail pipe all I have to do is buy some vitek wires?

PUUUHLEEEAASSE!

I have had great luck with the Jacobs line of stuff. It has done everything they have said it would.

I just want a nice fitting set of replacement wires for my 502 /mag/mpi

They do have a nice color selection. And the design sounds robust.

TAYLOR WIRES PLEASE
 

Taylor like kama said really in my veiw to is the best ,after alot of runs on the dyno ,tons of motors same wires the taylor seem to
resist heat far better than other brands and conduct like crazy

Hope this helps