Custom Dash Pannels
 

I need to have a custom dash pannel made up for my boat. This will look very close if not exactly like the Cig. switch pannels with different labels. Anyone know some one resonable for these things?

Jon

Email Mark at Mear [email protected]

dash panel
 

call team marine they have all the cig dashes and custom size
them for you.

Audiofn,
I just got new panels from MearImage for my Formula in white instead of black...looks sweet:D

Audio, i've had two panels made by Team marine now....both times i gave them paper templates to work with. And all i did was draw out what i wanted done. Both were powder caoted and lazer etched....very sweet work! Give them a call and ask for Kevin

Mear IMAGE is no longer on the Board, i think He got pissed about something, You'll have to E-mail him

nisongers in mamaroneck, ny had some great custom set ups when i picked up my throttles (which were very reasonably priced)...they used some sort of powder coating,and gaffrig gauges....the whole set up would just drop in place...

What all do you need to do? I might be able to help you out.

Try your local trophy shop in your town. I took all my pieces to them out of my Cig that were silver and my drive and trim indicater plate and they did them in white and when they cut the lettering it came through red. They should be able to order in a large sheet and cut it to your layout. My scanner is down or I would show you what it looks like.
Don't tell them it's for a boat and it won't cost that much.;) Good luck, Doug

Cord if you can find a picture of a Top Gun or Cafe Dash you will get an idea.

Jon