Lab Finishing props ?
 

Ok Guys, I know I have a combination that I don't think anyone else has, so I don't think that I can get any results without trying out props.

However, I'd Like to know what kind of speed / midrange increases do you get with a labbed prop....from searching the board, it looks like it may be 2 or 3 mph. Is this about right ?

My combo is a 31 scarab with 355's pushing shomewhere in the low to mid 400 hp range. Since it has small blocks in the back, it sits a bit higher than the rest of them, so I don't think it needs any stern lift (it flies really nice & level). The boat spins 21 MPs at 6000, and 23's around 54-5500. This gives me 70.4 on GPS.

Anyways, I don't have a lot to spend right now, but I'd like to gain an extra few mph (who doesn't). I really like the punch of the 21's, but like the cruise of the 23's. I also tried a 22 bravo I, with similar results to the 23s.

Any thoughts ?

Darin at HoustonProp can help you on your setup.
Call him at 281-580-7767
His pricing is reasonable.

Re: Lab Finishing props ?
 

Ratchet from what I have gathered from your great information ,I would suggest working the 21 pitch MPs and add alot of cupping/This will maintain the punch and run like a 23 on the top end. If this does not work, I will work the 23 MPs at no cost / one question what are the 21 pitch props running are they at 70.4 at 6000 or are you just talking about the 23s? Thanks Darin

The 21's at 6000 were giving me the 70.4. The 23's ran about the same top end (70.2 was the best I could get last summer ), but spun in the 54-5500 range . However, I liked the cruise with the 23's (saved gas & spun less). The acceration isn't really bad with the 23's (in fact it has more bite with the 23's, which actually lets me get on plane a bit easier..........the 21's tend to blow out if you get on it hard), It's just that the 21's worked well and pulled nicely through the entire RPM range :)

Maybe what I'll need to do is double check everything once we stop getting this F&%#*ng freezing rain & snow, then give you a call.

Like always, seeking an extra couple MPH.

Thanks Darin, Like I said, I'll call you when I get back out there,
RJ

Re: Re: Lab Finishing props ?
 

Darin,
Do you advise adding some cup to the Bravo 1's 24 pitch we discussed?

BVS629

Dennis:confused:

bvs629
 

Thank You for placing your order on the Bravo one's, we will call you the day they arrive and again thanks Dennis .
/H/P EQUALS HORSEPOWER AND Houston Propeller delivers H/P:D

bvs629
 

props are with the man in brown.:D

Re: Re: Re: Lab Finishing props ?
 

Looking forward to the return and running them this Memorial weekend!!

DW

Call Throttle-Up Props. 727 531-2255

They are the BEST.

Re: Re: Re: Re: Lab Finishing props ?
 

Dennis ,Iworked the bravo ones as we discussed ,lab and yes I did add a touch of cupping on the pitch section ,no rake was added,they are balanced on the money and hope you enjoy them ,Thanks again for the Business.Darin Houston Prop.281- 580-PROP

Darin,

I pick them up in the morning. I'm looking forward to the test
over the weekend.

HAPPY MEMORIAL DAY!!
Many thanks to you and Kim for the work and speedy turn-a-round.
I will let you how they turn up!

Dennis

bravo ones for bvs 629
 

we received your e mail and very glad to hear that we have another sastified customer and overall perfomance has been improved. Thanks Dennis:cool:

Darin Houston PROP:cool:

Next time I get prop work done I will shift the 3 blades to Houston
prop and the 4 blades to Throttleup.
Reason being; I feel I received the same quality work from both,
and the pricing for the work done was outstanding.from each company!
Darin, see that Matt and Julie receive this and visaversa.
your business and and professionalism

All my respect and " ya'll need to send these folks your request and work!

V/R,
BVS629

Dennis Welch