Top Gun Help needed
 

My shift cable kinked under the lever and it appears to be beyond repair. The boat is a 2001 top gun t/s, what length shift cable will it need and where do I get it?? Also, is there a resistance adjustment on the throttles?? They are kinda stiff. I used to have a cable luber for my MX bikes, is there such a thing for these??

If you look close at the cables were you can see them you should be able to see a foot marker on them. I am willing to bet that when you get the new ones in there they will move eisier.

Jon

I have a tension adjuster on my Gaffrig Throttle. I think you probably have Marine Machine's though.

Audio, I doubt his THROTTLE lever tension will change by replacing a SHIFTER cable:p :D

Call Tres, I'm sure he will send them right out to ya...

Did you ever sell that pair of motors you had?

Griff that is it!!!!!!!!!!!! YOU ARE SLEEPING ON THE FLOOR!!!!!!!!!!! :D:D

Jon

The motors are long gone. I am going to look at maybe adding a pair of blower motors over the winter and some big drives. I would like to run in the 100's but not at the expense of reliability (within reason!).

I'm bringing my air bed:p :p