Offshoreonly.com - Paging Houston Props

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Paging Houston Props (https://www.offshoreonly.com/forums/general-q/50849-paging-houston-props.html)

Mr. Demeanor

05-25-2003 06:06 PM

Paging Houston Props

What can be done with a Rev4 in the way of labbing. I dont want the pitch changed. Knife edge, balance, clean up etc. And how much? Its a 19 pitch if that matters. I currently spin it at 4500 rpm and could use some more RPM but Im also contemplating motor upgrades in the future so I dont want pitch taken out. This props run 2 mph faster than a 19 or 21 Mirage plus as is.

HOUSTONPROP

05-26-2003 01:22 PM

MR.DEMEANOR

YOU HAVE MAIL/ Darin

All times are GMT -5. The time now is 04:08 AM.