Stripped stud on coil?
 

Are studs on stock Merc coils replaceable or will I have to replace the coil??

If it's a Tbolt ignition, go get a new GM coil from the parts store, about $10. They work fine.
Gary

or use a push-on type connector.

or solder a wire on to it with a plug connector on the end.

Buy a coil ya tight ass !!!!1:D :D :D
Thats what...2 beers at the Casino ?????Of course..after you win the lawsuit from the Golfcart/jeep fiasco you will be ordering a new Gladiator anyway !!!!!!!!!!!!!!!11
See ya over there !:D

Tony, are you puttin the boat in this weekend? we'll be chilin up there all weekend, give me a call when you'r up there.

DO YOU FILL YOUR TANK WITH GAS OR PUT 5.00 IN EVERYTIME YOUR LOW FUEL LIGHT COMES ON.

:D OK, had I known that a coil was so cheap then I never would have asked this question:rolleyes: I never had the need to buy or even price a new one until now:o

Thanks for the help guys;)

One note. Merc sells their Tbolt coils for about $50. A standard GM coil works just as well. They cost $10 at any auto parts store.
Gary