Teague 509" crate motor
 

I have a boat the needs repowering, and was looking to add a new 496, but after flipping through Powerboat I noticed that Teague Custom Marine had a 509" 575 hp motor for 9995.....that is CHEEP.
Has anyone run one of these, how do they last?

Thanks for any info.

RT

They built me a pair of 509s a few years ago and they are flawless. I would imagine that if Teague puts his name on a crate motor then you won't have any problems.

Thank you that was exactly what I was thinking.

RT

This is what I found...

Horsepower:620 HP
Displacement:509 c.i.
Recommended Max WOT RPM Range:5,600 - 5,900
Block:V-8, Merlin II or GM Bowtie, 4-bolt main, 9.800 deck height
Crankshaft:5140 HP forged steel
Connecting Rods:Manley or Carrillo (on request)
Pistons:Custom J.E. forged aluminum
Rings/Bearings:Speed Pro/Hastings/M-77 H Series
Cylinder Heads:Merlin VR Heads, rectangular port, flowported, match ported, bronze guides,
A R PPro Series Studs, and Crane guide plates.
Valves:Manley SS and Inconel Valves (extreme duty)
Induction System:Brodix intake manifold/Holley Dominator 4-barrel carb
Valve Covers:Teague polished aluminum w/breathers
Ignition:Complete MSD Marine Ignition with Soft Touch Rev Control
Camshaft/Valvetrain:Custom Crane hydraulic rollercam and lifters, Manley pushrods
and Crane rocker arms.
Exhaust:CMI water-jacketed tubular stainless steel, polished E-tops with cool collar
(specify optional tailpipes)
The TCM 620 HP Package also includes:10 qt. Gil oil pan, custom engine wiring
harness, warning system, ATI damper, billet pulleys, flame arrestor, all MerCruiser
accessories — this engine is ready for installation!
Necessary BoatUpgrades:
fuel system.
Offshore oil cooler, hi-volume sea strainer, and modified
TCM also recommends:External hydraulic steering, Teague “Platinum Series” Bravo
Drive upgrade,Teague ST-450 switchable muffler tips, performance propeller upgrade.
Long block and short block versions of this engine package are available without warranty

The 620 hp is not the crate motor.

My buddy has a teague motor and it lasted 10 minutes but then he did go 108 for those fun minutes before he blew a motor and and XR drive.

Paul Pfaff builds a really nice motor, but you get what you pay for!

AMEN !!!!!:D :D

I'm almost positive their crate motor is a world products crate motor with a marine pan and their cam and MSD ,,thats easy and cheaper than that

Just found out from my supplier that world product motor they don't recomend for a blower,,I was hoping they liked it as we can sell that stuff cheap cheap :mad:

Ok,

Now I am totally confused, do you guy like this thing or not?

I just see it as one hell of a deal for that kind of power.

Thanks for any help.

RT

firewalker I thought it was a good deal until I found out what it is . You can call summit and ask for a world products crate motor
add a pan and 741 crane roller and add a marine merlin intake and you have their motor ,,,my supplier said don't use it so He turned down a sale and I trust his judgement