I run a 23 pitch Mirage Plus in my 23' Deep Vee. I went smaller because the my Motor was built to run in the 5200-5400 range. I am running at 5300 right now, 1/2 tank, trimmed, with two people. I tried a 24 pitch Hydromotive and could pull 4900+ rpm but I was blowing out when cruising in rougher water. Didn't like all the stern lift.

Patrick, I really don't think I could swing the 25p Mirage up to the correct rpm range. The Mirage 3 blade props are true to thier rated pitch, where as a bravo 24 acts like a 22.5, so I wouldn't be able to turn the 25. Thanks for the offer. I would consider selling the 24 bravo to you if my new Hydromotive works out for the best. I ordered it from Julie at Throttle-up in hopes that it will give me much needed stern lift. I ordered it in a 23p and then will look into having it labbed finished.

Harper220, you are probably right.

On my boat the 25 Mirage+ lets my engine max out at 4400-4500.
A stock 26p Bravo I max is 4300-4400. Had my 26p Lab finished and gain about 100rpm which is OK for a light load. I looking for a 24p for the days that I load up the boat.

Anyway, If you do decide to sell, please let me know.

23 HYDRO PROP
 

WHEN YOU ARE READY TO LAB FINISH THE PROP, KEEP US in mind/Darin;)