Offshoreonly.com - cam size suggestions?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - cam size suggestions? (https://www.offshoreonly.com/forums/general-q/54430-cam-size-suggestions.html)

OPA	07-14-2003 08:42 PM

cam size suggestions?

IVE HAD BAD LUCK WITH CRANE LOOKING TO GO WITH ISKY CAMS
ANY SUGGESTIONS WHAT SIZE CAM? FLAT TAPPET (HYD)
FOR A BIG BLOCK 454 ORIGINAL 365 MAG WITH GOOD ROD BOLTS, MANLEY VALVES, PERFORMER INTAKE & 750 OLLEYS

bobby daniels

07-14-2003 08:56 PM

I like the Isky 284/292 mega cam on a 112* lobe center it has to be custom ground but a very good cam and we have used alot of them and should have 2 or 3 in stock ,it works better as you know with pocket ported heads with a good valve job ,but that cam is a monster ;) ;)

OPA	07-15-2003 08:23 AM

COULD YOU TELL ME WHAT THE VALVE TIMIMG SPECS ON THIS CAM?

OPA	07-15-2003 08:24 AM

HOW MUCH FOR THE CAM & LIFTERS

bobby daniels

07-15-2003 10:43 AM

140.00 for cam and lifters plus freight to you

OPA	07-15-2003 04:59 PM

BOBBY CAN U CALL ME AT 1 248 521 6144

OPA	07-16-2003 06:25 PM

THANKS FOR THE HELP BOBBY

All times are GMT -5. The time now is 05:14 PM.