Offshoreonly.com - balancing my 502 crate motor

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - balancing my 502 crate motor (https://www.offshoreonly.com/forums/general-q/54669-balancing-my-502-crate-motor.html)

Dork	07-17-2003 04:12 PM

That flywheel is not correct, surprised it was on the 454 Gen v you had.
The GM part number for the correct flywheel: 14096987
You can get this thru any GM/Chvy dealer.

gene	07-18-2003 01:32 PM

Thanks for everyones help I am on the right track now.

bobl	07-19-2003 09:14 PM

Gene, I see you are in Austin. I have a shop in Spicewood and do quite a bit of high performance work. Be glad to help out a fellow OSO member if you need anything. Give me a call. 830 6935591

Bob

Matys

09-11-2009 08:01 PM

502 gen V EFi, flywheel missing teeth

From what i read, the Gen V 502 is externally balanced
My flywheel is missing teeth
so i can get the GM flywheel 14096987
Can i just put it on straight out of the box
Or i have to get it balanced ?
Or should i just put a new ring on my oldflywheel

cubicinches

09-11-2009 08:05 PM

Quote:

Originally Posted by Matys (Post 2950856)

Just replace the ring gear... they're less than $20.

wfo1	09-12-2009 07:36 AM

Quote:

Originally Posted by excaleagle42 (Post 626107)

Gen 5 and 6 are interchangable. MarkIV is not.

The only difference on any of the BBC flywheels is the balance. I am running the flywheel from a cast Gen IV 454 on my Gen VI 540. I just had it neutral balanced.

Matys

09-14-2009 11:02 AM

so GM# 14096987 flywheel is good out of the box, for my Gen V 502

All times are GMT -5. The time now is 05:33 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page