Offshoreonly.com - Need advice on head and cam selection for a Procharged 502 MPI

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Need advice on head and cam selection for a Procharged 502 MPI (https://www.offshoreonly.com/forums/general-q/55043-need-advice-head-cam-selection-procharged-502-mpi.html)

Cat-n-Around

07-21-2003 08:45 PM

Need advice on heads and cam selection for a Procharged 502 MPI

Just popped a head gasket after 120 hours. Figured this would be a good time to upgrade to Aluminum heads and cam. I have a M-1SC 50 lb injectors AZM fuel system. I need advice.

:confused:

paradigm shift

07-21-2003 09:05 PM

Any changes will probably require new fuel curve on ECM. I would start with AZM or some one that has a proven package or plan on dyno time to tune in. What kind of HP are you looking to get?

Cat-n-Around

07-22-2003 04:44 AM

Looking to get some were around 750.

All times are GMT -5. The time now is 12:38 AM.