headers (stellings) clearance questions
 

ok so everythign fit great on the tailpipe side of the equation BUT the front of the port header hits the damn power steering/alternator bracket!!!!

how exactly does that get remidied? who make a bracket that will relocate them and clear the headrs but still work with the main pulley belt locations???

shes getting damn close to running!!!

Lets see a pic...you might be able to get away with just a longer or shorter belt.

Dan

unfortunatly the bracket itself is in the way and its solid.

look at teh header on the othe rside and you can see what the problem will be.

Eickert had some, I wold try that, my power steering is on the left. Bu mine are also tall decks.

PS Bracket
 

Puder, can you mount the pump on the star side? Merc offers a mount for that side. It positions the pump a little lower than your bracket. I have ran mine there with Stellings.

i unfortunatly put all my wiring crap on the other side and that headers just barely clear that as you can see. I am goignto call eikert tommorow. Any other companies you recommend?

I have the exact same problem if you figure something out call me please Im ready to run just need to get this damn exhaust on
636-221-2023

as i recall i took a stock bracket an cut half of it off. I was able to mount the pump much closer the center of the motor and just used a super short belt from and auto parts store.

fyi it required that the steering pump and the alternator be mounted on seperate brackets.