anyone put stellings boxes on 93 35 fountain
 

have purchase in motion for a set of stellings stand off boxes any input
93 non step fountain 35
540 hp motors runs 82 +/- depending on the conditions now fairly easily, std braco 1's with nose cones.

You should go with the IMCO boxes...you will need to change your hyd. steering.
They have wing plate mounts for the new rams.
If you do the neutral setback ones, you will have to do shorter lowers.
The motors will have to come out to install the boxes.

:cool:

i was told these boxes are (race boxes adjustable x )?
and i would not be able to mount my steering huh...
hmmm not good.
i gotta call him again,,
thanks

The only way you could move your X is shorter lowers or move the engine CL up...as in remount your engines higher in the boat.

oh that would be no fun!

If you have Latham steering they make a kit to use their steering with Stellings boxes

i have mayfair

Are they Stelling boxes - If they are then they are probably 3 inch rise but you can adjust them by the bolt holes that you use to mount them to the transom. You don't have to raise your engine with stelling boxes but it helps. With the IMCO boxes you have to raise the engine. If you aren't going to buy the boxes PM me with the info as I might be interested.

I already bought em.
thanks for info
do u know what i do about steering ?

thanks for helpe here guys!