Offshoreonly.com - Dart Intake height

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Dart Intake height (https://www.offshoreonly.com/forums/general-q/58291-dart-intake-height.html)

RickR

09-02-2003 09:22 AM

Dart Intake height

How much taller is the HP 500 Dart than the stock GM Aluminum High Rise?

Thanks!

tomcat

09-03-2003 06:48 PM

The Dart carb flange is parallel to the crank and about 6.125" higher than the front of the block where the intake sits. The GM has an angled carb flange so the height depends on whether you measure to the front or rear of the flange. I can't remember the measurements but if you have one you can measure it yourself.

All times are GMT -5. The time now is 08:36 AM.