Offshoreonly.com - System1 Oil Filters

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - System1 Oil Filters (https://www.offshoreonly.com/forums/general-q/60028-system1-oil-filters.html)

Johno

09-24-2003 09:39 PM

System1 Oil Filters

I was wondering if the System 1 Oil Filters are any good? I see Too Old had an major issue with a bad casting? Greg P seems to like his filters. I want to use the system 1 on my HP500 because I can easily open it up check the "screen", however I'm cautious as I searched the Web and could't even find much info about these guy's. I am presently using an Fram HP 6 filter.
Thanks John
Ps I also have a KE Thermostat controlled remote oil filter pad..how do I run the oil lines into this unit?

22Pachanga

09-24-2003 10:01 PM

1 Attachment(s)

For oil line routing look on Keith Eeickerts site. under lubrication and oil thermostat they have a link to a picture for hook up of lines. http://www.keith-eickert.com/

Hope this helps

Scott

GregP

09-26-2003 10:33 AM

I have had no complaints about my System 1 filters, but the price for them has gone WAY up. I like being able to inspect/clean them, but think if you can get them easily the synthetic WIX filters would be a better bang for the buck. Cutting them open for inspection is really not a problem. I will not use paper element filters on the boat again.

-Greg

All times are GMT -5. The time now is 09:24 AM.