Offshoreonly.com - camshaft for stroker motor

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - camshaft for stroker motor (https://www.offshoreonly.com/forums/general-q/6466-camshaft-stroker-motor.html)

22ADVANTAGE

01-16-2002 07:25 PM

camshaft for stroker motor

I am stroking my 454 with a 4.25 callies crank,6.385 manly rods,srp pistons with 9.5 comp.,and edelbrock oval port marine heads. My question is i was thinking of going with an hp500 cam, (crane part # 169611)but dont know if my fuel injection will work with this combo. :confused:

Beak Boater

01-16-2002 07:49 PM

Talk with Arizonia Speed and Marine. They are in Hot Boat and Power Boat Mag. They can reprogram your ECU and make it compatable.

All times are GMT -5. The time now is 04:37 PM.