Trim molding
 

Hey guy's,
Wondering where you would find trim molding and items that a boat builder would have to use when building the boat?
I have an Active Thunder and there is a L shaped black plastic trim that covers the edge of the engine cover. I can not find this any where.
Any help is appreciated,
Thanks,
Active Mike

I have also looked for trim molding and have not had much luck. So can anyone help?

Too Old,
Thanks for the web page info but they do not have what I'm looking for. Where do the boat manufactures get these type of trims? I've checked around and it's like running down a dead end street.

No they seem to not want to be bothered with this kind of stuff.
I will try them to see what kind of luck I have.
Thanks again,

Try www.barbourplastics.com , Baja uses them for a lot of moldings.

C~

Thanks Boatstuff I give it a try.

Check out Outwater Plastics in Woodridge NJ

Thanks Bruce for the info I will try Outwaters. Still have not found what I'm looking for. The trim that I'm looking for is approx. 3/4" high and with a small 1/4" lip on the top of it making the L shape. It covers the edge of my engine cover decking and screws hold it in place.

Also it is plastic that bends to what ever contour that you apply it to.

Hey Mike.

Are you sure this isn't what you are looking for? I have it in my Mirage, sounds the same.

the product is by Taco and the part #s are;

V25-9424 1/2" black edge trim

V25-0758 7/8" black adge trim

wallynt,
Can you see this molding on Taco web page?
I'll try to see what I come up with.
Thanks,
Mike

Mike.

I was looking in a Taco catalogue I have. I'll try to scan the page and attach it for you.

Let me know if you have any luck.

P.S. How much do you need, I might have some around my shop.

Paul (aka Wallynt)

Paul,
I was looking for about 50' of it. If you have a picture of it send it to me. That way you don't wast your time sending me something that won't work for me.
Thanks for your help,
Mike

Mike.

I only have a few scraps so I can't help you out on the 50' but here is a scan from the catalogue. You can call Taco at their toll free # 1-800-226-8201 and see if they still produce the moling and ask them the closest place to you where you can get it.

Hope this helps.

Paul.

Paul,
Thanks a lot for the picture and phone #. I will try contacting them Monday.
Thanks again,
Mike

Hey Mike.

Any luck from Taco with the molding?