Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Performance Shop in Central TX? (https://www.offshoreonly.com/forums/general-q/66862-performance-shop-central-tx.html)

bford1 12-21-2003 03:44 PM

Performance Shop in Central TX?
 
Does anyone know of a good performance shop in the Ausitn, TX or poissibly San Antonio area? I currently have my Formula 357 at the Formula dealership on Lake Travis. While I'm sure they're good for service work I would like to find s more performance oriented shop.

Any ideas?

Thank you

ST31 12-21-2003 06:24 PM

Check out Full Throttle Marine right by you in Spicewood, Tx. Bob is currently rebuilding the engines out of my Sonic. He has also done work for Clay Washington as well.

http://www.fullthrottlemarine.com

ST31

bobl 12-21-2003 06:57 PM

Give me a call or shoot me an email. I'd be glad to chat with you. 830 6935591.

bford1 12-22-2003 01:14 PM

Thanks guys -

Bob - I'll shoot you an email in a few minutes.

Brent

Joe 12-23-2003 12:30 PM

I let a well known marina and machine shop work on my, supposed bad head, and after $2600, and them not willing to go back into the motors, after they put them back together, and re-address the problem, I took it to my mechanics and machine shop - Mars Marine and Owens Racing. Mars: 281-326-6630 located in Seabrook, Tx aka Houston, Tx aka Clear Lake, Tx. Owens Racing is located in Pearland, which is a suburb of Houston toward the South.

After taking it to Mars/Owens, I found I had a whole different problem than the Austin mechanics and machine shop guys said. Oh, by the way... this "well known" machine shop told me i had a cracked head and i needed a new one = which they'd graciously sell me for around $900. i told them to halt everything and brought the head to Owens (who not only could get me a fitted head for $600,brand new from GM, but found that i only had a bad alignment pin. Replaced it and all tests fine!), who took great care of me, as they always do and Mars found the "real problem."

Ask for Travis Brewer, Owner of Mars. He'll get you set up w/ Owens if you ever need machine shop work. I was referred to Mars,when I lived in Austin, from 94-99, and have been with them ever since; from my 26' to my current 38.

give me a call if you'd like more details. I'm out of pocket until the 28th.

Joe 12-23-2003 12:32 PM

P.S. = I, along with several Austin boating friends, find it well worth the time/drive to get the work done "right" the first time and trouble shot for any future problems/maintance etc..., by traveling to Houston.

Dueclaws 12-23-2003 01:31 PM

The phone number for Owen's is 281-485-5257. Talk with Joe.
He has my 572" engines for freshening.
Due

H2Xmark 12-23-2003 07:38 PM

Owens is a local favorite around here, he can go from mild to wild, give him a call

Joe 12-24-2003 09:22 AM

Previous Two Posts re: Owens
 
P.S. Owens has both of my 500 EFI's doing top & bottom freshening up as well.

What boat do yau'll have? I see one is a 29 Baja, but what's your boat names, photo's etc... post a shot so I can recognize you on the lake. Mine is my avatar, "Stress Management"

Joe

H2Xmark 12-25-2003 09:02 AM

Hey Joe, I get to clear lake every now and then, i know some of the TOPPS group, going to get with Eubanks on signing up , but my 29 outlaw has the sST pack with purple graphics[lightning bolts]
Mark R


All times are GMT -5. The time now is 09:29 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.