Houstonpropeller has done it again!!!
 

Darin fixed up my mirage plus with the acclerator upgrade. I do not even want to put it back on the boat it so pretty. It looks just fine as my center piece on the kitchen table. I have some pics but I am not gold yet. Will someone post them for me please.

I'll post 'em, email me:
[email protected]

I also had mine done by Darin.....I hate to put them under water!.....Fred

Pics are on the way, thanks Nick.

No problem, David. They look great. :)

2

Look great, mine were sent to Darin yesterday. Can't wait until the ice melts up here I get to try them. Only 5 months to go! :D

Hagg, Milord,AND MR.Daze:cool:

Thanks Darin

Well, would you just look at that....

Customer service while he works!!! :D :) ;)

:rolleyes: I try;)

Ok,,,how much to do my 17 1/2 x 28 four-blade SSM3A props?

how much to work props
 

we take GOLD CARDS:D ;)

I will try to P.m. you and if that does not work ,

CALL ME AT 281-580-7767 Thanks:)

Well, I was going to send you a PM but your box is full. I won't know what to do with the props until I sea-trial the boat this spring. With a few improvements to the engines I hope to spin them just a touch faster than last year, which was 5000 rpm. I was able to find some free horsepower by eliminating an airflow restriction during the dyno runs before the engines were torn down for overhaul. With a few minor improvements I'm hoping for 675 hp@around 5400. But I'll keep you posted and we'll see about getting the props to you early this spring.

CRAZYHORSE
 

THANKS,YES I have been out moving into our new home :rolleyes: :D :) it's great just have everything set up and the computer was the last thing ,I havent been at the shop in three days ,but they dont miss me anyway .Thanks for the post and stay in touch ,we can achieve your propeller GOALS.P.S. GIVE ME CALL next week and IWILL SAVE YOU MONEY!

Darin:eek:

The Accelerator prop really does deliver. I have no more blowouts even in the sharpest turns and my boat accelerates off the corners like a sports car. Mid range is much improved and plane speed feels like a 21-pitch prop and not the 25-pitch that it is. I am truly amazed that right prop can make such a difference and I am basing this comparison to the brand new stock Mirage Plus 25-pitch prop that I sent to Darin for the conversion.

My boat is a 22’ Scarab with the 454-EFI Bravo

Thanks Darin
Roby

GREAT NEWS
 

WE ARE GLAD TO HEAR THIS AGAIN ,tHANKS VERY MUCH ROBY FOR THE BUSINESS.:)

We also did a 22 scarab with a four blade basically same design except in the Bravo-one four blade which the customer picked up4 mph and we decided to call it the

BRAVO -RATOR:D :eek: :D it's still in testing phases as well we are building some five blades that will be soon coming.That's all the info we can give at this point.

Darin, Do you sell and or install nosecones? I'm not looking for a performance improvement but rather just the cool looks.

Roby ;)

nose cone installation
 

roby,you boat already looks cool:cool:

you don't need one ,but we used to install them and it's alot of work,they must be perfect and it is very time consuming.

go to [url]www.bobsmachine.com and check out his site he is probably the guy to go to if you really want one,I can sell you one and everything you need to install it but,you need to take the drive off and make sure it's perfectly straight as well the paint needs to be done professionally.

just my .02 cents

if you want give me a call,talk to you later Darin

ttt to reach 300 downloads of the pics!!

ACCLERATOR UPDATE
 

I, have had several people ask if we can modify there Mirage not the Mirage plus into the ACCERATOR design?

yes, we can. actually it's a little easier as the blades are a touch thinner than a plus .And the performance turns out to be the same end result of a quicker hole shot with no blow out ,faster midrange accleration and much quicker on the top end of 2.5 to 3 mph some have reported more most most are 3mph.

Looking Back
 

I, was just looking back at this thread back when we invented the ACCLERATOR prop.(or converted the Mirage)

Thanks to the now HUNDREDS of customers that now run our prop from Canada to Germany and around the states ,that are very pleased with the ACCLERATOR design ,

the APPERANCE,AND PERFORMANCE of the ACCLERATOR design it truly is a piece of ART work.

Thanks to everyone for your support.

A special thanks to my brother Sean,and Kim

for there hard -work .:cool:

Darin:rolleyes: :)

Hey Darin.. should be water testing soon... new engine mods..added..177's... ...trying 26'' Q-IV'S.. still wanna send you those 23'' p merc offshore series to re-pitch and play with... talk to ya soon...DAVE

Whats the area code for Darvin at Houston Prop

Thannks

Doug Biddle

Houston Props
 

phone 281-580-7767

Scarab3DMC
 

Dave we will be here,Thanks so much ,Darin