Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Taking the hook out!! (https://www.offshoreonly.com/forums/general-q/69192-taking-hook-out.html)

TomR 01-16-2004 07:30 PM

Taking the hook out!!
 
I have read that on the 26ft Scarab that taking out the slight hook in the pad will help the top speed.
I have a 1988 28ft Scarab Excel which is the same bottom design and shares the same slight hook.
Should I just sand the area with 200 grit paper and fill the hook with gelcoat??

TomR 01-17-2004 01:22 PM

TTT

H2Xmark 01-17-2004 01:38 PM

there is a great article in the march2004 issue of Family&performance boating, on page 90 they take the hook out of a scarab 22 and picked up 4 mph!!! it is 4 pages long and has some color photo's in it,
Mark R

TomR 01-17-2004 04:17 PM

Thnaks Mark. I'll try to find it.

homan 01-17-2004 06:46 PM

TomR I have the exact same boat how fast are you in it now.

Ric232 01-17-2004 08:05 PM

From what I've heard/read, you can run into some wild handling issues when you remove the hook, especially porpoising.

TomR 01-17-2004 09:05 PM

homan,
I run a 550hp 502, the boat runs about 75mph.
I'm turning a labbed 25 pitch Mirage "plus" at between 52-5300 depending on the temp humidity etc.

obads 31 01-17-2004 10:35 PM

TomR I'm over on Nantucket in the season I have a '81 26' wellcraft . I'm in the middle of a rebuild project. I stripped out every thing, motor,trans,drive Arneson #6. I'm going to try to keep it as light as possible .so I've bought a HP 350S/B to start of with. If all goes well what is happening with small cubes and BIG TURBOS is VERY interesting . Seems like you can have huge power with 200 to 300 lbs off the ass end of the hull. Anyway I took the hook out of my hull ,but I havent tried it out yet . so if you do the same we'll both find out. I have a Yamaha GP 1200 slightly hopped up. Anyway that thing porpoised so bad it drove me nuts. I tried every suggestion I got,new scoop,different ride plate,new sponsons on & on. Then aguy told me to get a grinder and to make the edges of the strakes and the back edge [bottom/transom] as sharp as possible. So I did that and it is'nt pretty BUT, NO MORE PORPOISING. I hope this follows thru on a26' hull as well as it worked on a10' hull. Any other opinions out ther on this hull??? andrewmasonsr

robyw1 02-07-2004 10:26 AM


Originally posted by H2Xmark
there is a great article in the march2004 issue of Family&performance boating, on page 90 they take the hook out of a scarab 22 and picked up 4 mph!!! it is 4 pages long and has some color photo's in it,
Mark R


Is this Family & Performance Boating magazine available in any bookstores? I could subscribe but would probably not get the issue with this Scarab hook article.

Roby

BadDog 02-07-2004 11:17 AM

Roby,
I have looked in every bookstore and many Drug Stores in my town. I have not found it. If someone comes up with it could it be shared without copyright problems?


All times are GMT -5. The time now is 08:38 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.