Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   ECM Recalibration (https://www.offshoreonly.com/forums/general-q/73400-ecm-recalibration.html)

00nsx 03-06-2004 05:04 PM

ECM Recalibration
 
I am looking for someone who will recalibrate a merc ECM. I bought a used one...correct part, but wrong calibration. It is an MEFI3. Dan

red thunder 03-06-2004 05:40 PM

Call Mark at Precision Marine 504-469-7463

INDY27 03-07-2004 06:36 AM

Mark is THE man for ecu upgrades!

liquid asset 03-07-2004 08:54 AM

I used Arizonia speed and marine

mlitefan 03-07-2004 03:25 PM

OK...I added headers last year and have been told I sould re-program the ECU. I don't want to be running too lean.

Is anything done to help bump the top end at all?

00nsx 03-07-2004 03:58 PM

i am told you can certainly tweak the calibration. the issue is getting it right. btw is it ecu or ecm?

syclone 03-07-2004 04:05 PM

ECU: Engine Control Unit
ECM: Engine Control Module
->no difference, just to the liking of the manufacturer
peter

red thunder 03-07-2004 11:51 PM

You can get the ECU to push stock motors some more, but will have to run premium fuel. Weigh the cost vs. gains. Give mark a call, no harm in asking.

open87 03-08-2004 06:40 AM


Originally posted by Red Thunder
Call Mark at Precision Marine 504-469-7463
www.precisionmarine-efi.com

nsxmo 04-02-2004 12:07 PM

ECM RECALIBRATION
 
I just wanted to thank everybody for referring me to Mark at Precision Marine. He is well-equipped, with a bench test simulator and software. His pricing was quite reasonable, stayed in phone contact and was prompt. So, from a very pleased customer I highly recommend Mark, at Precision Marine (504) 469-7463
for any ECM recal or related issues. Dan


All times are GMT -5. The time now is 01:34 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.