who makes custom lenth trim hoses
 

need ss braid 5/16 ends for bravo,from pump to block in gimble.

I had them made at Goodyear. They were about $55 a piece I think. I have seen them on ebay considerably cheaper.

any industrial hydraulic hose and supply place should be able to do it. Just make sure they use only brass and stainless.

If you keep the boat in salt, then stainless ONLY, all one metal.

eddie marine , parker lines and fittings and good prices

Parker Hydraulic. They have a nationwide dealer network, probably have one in your town. They have stainless hose and ends, can custom-make about anything. Prices will beat anything you can find from a marine supplier - by quite a bit.

I used Aeroquip brake lines for mine. The hardest thing was to find the correct fitting for the pump. It was a stock adapter that Aeroquip carried, I just didn't know what size to use.