Offshoreonly.com - Main cap bolt with windage tray extension

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Main cap bolt with windage tray extension (https://www.offshoreonly.com/forums/general-q/74022-main-cap-bolt-windage-tray-extension.html)

formula31

03-13-2004 02:12 PM

Main cap bolt with windage tray extension

Anybody have one and can measure the distance from the cap surface to the windage tray surface? 454.mark 4.

38KV	03-13-2004 02:18 PM

I'll be in my garage next week, and can measure it for you.

Reed Jensen

03-13-2004 03:53 PM

Are these what you are looking for... I can't remember if they are for the windage tray.... but I'm sure they came out of a MK IV....

Waterfoul

03-13-2004 07:36 PM

That's what mine look like Reed. I also run a Mark4 block.

formula31

03-13-2004 11:39 PM

OK, pics are wonderful ( that I cant see), but I need a dimension. hehe
. Thanks guys

Reed Jensen

03-14-2004 12:29 AM

Quote:

Originally posted by formula31
OK, pics are wonderful ( that I cant see), but I need a dimension. hehe
. Thanks guys

Roflmao.... I didn't notice that you aren't a paying member..... there is a measuring tape showing the dimensions... it is exactly 1 3/4 inches.... :p I posted the picture because I couldn't remember what the bolts were for... it was almost 5 years ago since I changed them... but they were confirmed to be the windage tray bolts... those are the dimensions you were looking for as you described.

38KV	03-14-2004 09:02 AM

I suppose you don't need me anymore. ;)

formula31

03-14-2004 12:58 PM

Thank for the help guys , thats exactly what I needed.

All times are GMT -5. The time now is 12:22 AM.