Offshoreonly.com - Mark 4 ,Gen5 and Gen 6 Flywheels for 454

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Mark 4 ,Gen5 and Gen 6 Flywheels for 454 (https://www.offshoreonly.com/forums/general-q/74457-mark-4-gen5-gen-6-flywheels-454-a.html)

rws	03-18-2004 11:27 AM

Mark 4 ,Gen5 and Gen 6 Flywheels for 454

Are the flywheels dimensionally the same?Are they just balanced differently because the Gen 5&6 don't have the additional balance/counterweight at the flywheel flange?

Thanks
Rob

Mr Gadgets

03-18-2004 07:48 PM

Rob,
I found that when the new Gen 5 came out the bolt pattern to the crank was the same between Gen4 and 5 but the balance was different. I believe the Gen 6 is the same. I could not find a flywheel for my Gen 5 back then. Chevy would not sell them. I was able to get one released from Chevy by Merc thru a Chevy dealer in NY. A short time after that they were made available to the public, but that was in "93".
Hope that helps.

Dick

All times are GMT -5. The time now is 04:21 PM.