Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   12v relays - who makes good quality ones? (https://www.offshoreonly.com/forums/general-q/74978-12v-relays-who-makes-good-quality-ones.html)

p4-33 03-24-2004 11:11 AM

12v relays - who makes good quality ones?
 
I'm plumbing up an electric fuel pump system, and need a source for GOOD QUALITY 12v relays. They need to be able to trigger a 30A circuit.

Thanks,
Brian

Cord 03-24-2004 11:20 AM

Bosch.

p4-33 03-24-2004 11:24 AM

Thanks Cord

Wally 03-24-2004 01:51 PM

if you want something that looks good and maybe overkill check this out: http://www.dedenbear.com/mrc1txt.htm

they also sell the Bosch relay rated for 30A with terminals and a mounting bracket for $14 ea :)

Reed Jensen 03-24-2004 06:09 PM

Bosch makes a nice 20/30 amp one that works well for fuel systems. I'll attach a photo.

Reed Jensen 03-24-2004 06:10 PM

They are about 5 bucks each new at electronics supply houses.

p4-33 03-25-2004 12:13 AM

Thanks Reed,

That picture with the part number did the trick.

http://www.dieselmanor.com/electrical/relay30A.asp

$3.99 ea., so I bought a few spares.

Reed Jensen 03-25-2004 12:54 AM

I'm glad I could help... those have been good for me... small... a pair can even fit in a motorcycle headlight bucket behind the light and work well.

Liberator21 03-25-2004 11:13 AM

MCM Electronics sells the Bosch 30A and 40A relays for $1.01 each, and the matching socket for $.083 each.
www.mcmelectronics.com

Audiofn 03-25-2004 12:44 PM

You should check out the draw on your fuel pumps. If they are 30 amp draw then I would suggest you wire them in parallel as you are to close to the tollerences of even the 30-40 relay. Most fuel pump relays are 60 amp. However by wireing in parallel you get a 60-80 relay. Hope that helps. Oh ya these are car relays so make sure you seal them up and also I would use a liberal coating of white lithium grease or something similiar to help with Corrosion.

Jon


All times are GMT -5. The time now is 05:51 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.