All I have on the truck now is the Shackle and hangers on the rear and the front is stock.
I have a set of 3" drop springs for the front but I was told that the drop beams would be better.I really do not want to c-notch the rear if at all possible.
I wonder how it would look if I just put the beams on it for now?

Do you know what kit he used?

KCHOTBOAT, we put in the DJM 3/5 kit, comes with shocks and such, we used the factory shocks up front and the rears from the kit. On that f350 we had to take the over lead out as well. He pulled my hustler with his truck no problems. He emailed me back and said he would get some pics of it to me, also asked for one in action.

Amarket1, if you just wna thte 3' front do the beams. Not to make ya spend extra money and such since you have the springs already, but for the 3" drop in front run the beams if going to 6" do the whole thing beams and springs. The 3/5 dosent look bad at all, wish I could my pics of the guys that we did and post instead of waiting for him t get them to me.

ah bag set up

back end on 16s laid out

post hoing now:D :D
chevy 3/5

ok gotta scan some more on the post later

The 3/5 would be fine for me now since I use it as a truck always hauling stuff so the bags are out.
How do you get a 5" drop fo the rear?

Are you a dealer for the kits?

amarket, The rear will ahve to have the rear shackle and the front spring hanger for the back set up. since you got the shackle the spring hanger would be all you need along with rear shocks, (shorter).

Me can get kits yes, Just have the best luck with djm on fords. I also use the aim stuff when needed along with (gulp) bell tech

does any body make a kit to do a 4x4???