1987 Hawk 511 info needed
 

Does anyone have any info on this engine. I believe I have two of these in my 87 Cafe Racer and wanted to find out more details about the engines.

1) What Blocks were used?
(Mine are the 427 tall decks bored .06 over with 4.375 stroker cranks.)

2) What camshafts did they use?
(Mine have Crane 296 CCH. Part# 134561)

3) What kind of horsepower did they make?
(I was told around 500HP.)

4) Any other comments welcome.

I also have the Hawk engine literature that came with the boat. Here is a pic.
Hawk Power 511.

Mine still have the Dominator intakes, but the carbs have been switched over to 830 cfm's with 2" adapter spacers.

[ 02-10-2002: Message edited by: NW_Jim ]

Boy, puder buried this thread pretty deep. I hope he deletes all those post like he said he would.

Jim,
I have the brochure also but I have another sheet that has some specs on it for those motors also. Let me know if you want it and I will try to scan it. I don't know if it has what you want on it
Mark

Mark, I definitely would appreciate any info I could get. The brochure I have only has info on the 540 inside. Here is my email address.

[email protected]

Ok I'll try to remember to bring it to work and scan it.
Mark

Jim,
Check your e-mail I don't know if it went through
Mark

Thanks Mark, that was the missing link I needed.:D