stern drive
iI raised the stern drive and i can't get to come down, what could be wrong?
please help |
Switch, solenoid, wiring, battery, trim motor.
Go to the pump and cross the solenoid terminals and see if you can get it to move. That will at least rule out the battery and trim motor. |
Had the same problem recently. Removed the hydraulic lines on the outside of the boat and had someone inside run the switch up and down. Replaced the lines and the drive started moving again. Apparently there was air in the "down" side of the rams.
Give it a try...cheaper than hiring a mechanic. D. Ocean Pompano Beach, FLA |
All times are GMT -5. The time now is 03:53 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.